Home/Bull bars/Mitsubishi Triton
EFS Xcape · Stockman6 EFS Xcape and Stockman bars for the Triton, from $1,952 RRP. Part numbers, airbag and sensor compatibility below, fitted at our Miami workshop.
Every EFS bar for the Triton, by build date. EFS RRP in AUD including GST. Fitting is quoted for your vehicle.
Mitsubishi Triton MV 02/2024 on
EFS part XEB-MITS-05
Mitsubishi Triton MR 12/2018 to 01/2024
EFS part XEB-MITS-03
Mitsubishi Triton MV 02/2024 on
EFS part SB1-MITS-05
Mitsubishi Triton MR 12/2018 to 01/2024
EFS part SB1-MITS-03
Mitsubishi Triton MQ 05/2015 to 11/2018
EFS part SB1-MITS-01
Mitsubishi Triton ML and MN 09/2006 to 04/2015
EFS part SB1-MITS-02
EFS part number, EFS RRP and airbag and sensor compatibility for every bar, from EFS. All EFS bars meet Australian Design Rules and airbag compliance standards. We confirm sensor, camera and radar fit for your exact build before you order.
| Vehicle | Bar | EFS part | EFS RRP | Airbag compatible | Sensors and cameras |
|---|---|---|---|---|---|
| Mitsubishi Triton MV 02/2024 on | EFS Xcape | XEB-MITS-05 | $2,164 | Yes | Pre-drilled, sensor holders in the fitting kit. |
| Mitsubishi Triton MR 12/2018 to 01/2024 | EFS Xcape | XEB-MITS-03 | $2,059 | Yes | Pre-drilled, sensor holders in the fitting kit. Not compatible with the GLS premium model with 360 degree grille camera. |
| Mitsubishi Triton MV 02/2024 on | EFS Stockman | SB1-MITS-05 | $2,112 | Yes | Pre-drilled, sensor holders in the fitting kit. |
| Mitsubishi Triton MR 12/2018 to 01/2024 | EFS Stockman | SB1-MITS-03 | $1,952 | Yes | Pre-drilled, sensor holders in the fitting kit. 360 degree camera compatible. |
| Mitsubishi Triton MQ 05/2015 to 11/2018 | EFS Stockman | SB1-MITS-01 | $1,952 | Yes | Parking sensors need EFS holder BB-PSH02. |
| Mitsubishi Triton ML and MN 09/2006 to 04/2015 | EFS Stockman | SB1-MITS-02 | $1,952 | Yes | Parking sensors need EFS holder BB-PSH02. |
Prices are EFS recommended retail (RRP) in AUD including GST, from efs4wd.com.au, October 2026. Fitting is extra and we quote it for your vehicle. Seen a genuine EFS product cheaper at another Australian retailer? Show us and we'll look at matching it.
Xcape is EFS's bumper-replacement bar: slimline, high clearance, LED aux lights and lower bash plates. Stockman is the classic tube bar with oversized 63mm top tubes, rubber bumperettes and an aerial mount. Both are winch ready.
Read the full comparison: EFS Xcape vs Stockman.
Yes. EFS says every Xcape and Stockman bar listed for the Triton meets Australian Design Rules and airbag compliance standards for the models it's built for. Check the build dates in the table, since bars change between facelifts.
It depends on the bar and your model. Some Triton bars come pre-drilled with sensor holders, some need the EFS BB-PSH02 holder, and a few aren't compatible with 360 degree camera models. The sensors column shows each one, and we confirm your exact build before you order.
EFS bars for the Triton start at $1,952 RRP. Fitting depends on your model and whether you add lights or a winch, so we quote it with your job. Supply only, for pickup or shipping, is also available.
Usually, if you add a winch or already run a lift. A steel bar and winch add weight over the front axle, so we match EFS front springs to it. See the EFS lift kits for the Triton below.
Tell us your vehicle and what you're after. We'll text you a fitted price within one business day.
